FLUTEC Hydraulics has exported four only Marine Cylinders for Split Hopper Barge Bore:650mm, Rod:350, Stroke:1860 Rod material:42CrMo, Coating on Rod: Ni/Cr plating layer
FLUTEC Hydraulics spent 65days in finishing these six hydraulic cylinders for our customer in Canada. More and more hydraulic cylinders made by FLUTEC Hydraulics have been exported to abroad press manufacturers. 4 nos. Double Acting Cylinders Bore19.5inches / Rod 18inches x 55inches 2 nos. Single Acting Cylinders Bore 16.5inches/ Rod 16inches x55inches
FLUTEC Hydraulics finished the three stages telescopic cylinder for offshore oil rig Total Stroke 9800mm, Pushing Capacity 250tons. Three Stages.
Dear Friends, Please kindly noted our office is close from Feb. 2nd,2019 to Feb. 12,2019 for celebrating chinese new year! We will come back office on Feb. 13,2019 after our holidays.
FLUTEC Hydraulics successfully exported Furance tilting Cylinder 410/250×3910 to steel mill in South Africa. Merkel seals was used for this cylinder. We have strong suppliers of all materials including forging,casting,chrome plating, seals and other standard parts. All machining process were operated and quality-controled in house.
Dear Friends, Our office will be closed from Feb.12, to Feb.25,2018 for celebrating Chinese Spring Festival. Should you have any inquiry,please send emails to us via [email protected] . We will deal with your business immediately once coming back office on Feb. 26,2018.
FLUTEC Hydraulics successfully exported 4 pieces of Luffing cylinder 400/200×3550 to RBCT in South Africa. The piston rods were made in EN24T material and Ni/Cr plated . Hallite Seals and LYC bearings were used for these cylinders The appointed quality engineer inspected all the material certificates, welding process procedure, finished parts dimensions and pressure testing. And these four cylinders have been certified by SGS as per end-user’s requirements.
FLUTEC Hydraulics successfully exported one Bore280/140×5450 hydraulic cylinder c/w hydraulic power unit to a Hydropower Plant located in Vietnam. The piston rod was made in 2Cr13 stainless steel and double layer chrome plated. Parker seals and Rexroth Valves were used for this cylinder. The Vietnamese inspect engineers have inspected this hydraulic hoist step by step and is very satisfied with our quality.
FLUTEC Hydraulics successfully exported many hydraulic cylinders and Press Bolsters to a world class press manufacturer located in Toronto city of Canada. All cylinder tubing were made from one piece forging ,the raw material is CK45 QT to Min. 380Mpa yield strength All cylinder rod were made from one piece forging, the raw material is AISI 4140 HSR to Min. HRC25. System Seals were used for these cylinders. The weight of this large bore cylinder is 23900kgs. It will be installed for [...]
FLUTEC Hydraulics successfully exported many pcs of hydraulic cylinders to Master Drilling Group located in South Africa. Our Hydraulic cylinders have been installed in their key earth boring equipments . Every hydraulic cylinder was inspected by the appointed inspecting engineer.