20
Aug
Flutec Hydraulics have been supplying various type large bore cylinders for press manufacturing
read more
25
Aug
Marine Cylinder for offshore Crane
Bore450 / Rod380 x Stroke 5435
Norminal Pressure: 32Mpa
Cylinder Tube material: Q345E
Piston Rod Material: 42CrMo
Coating on Rod: 300microns Ceramic coating
Seals Make:SKF made in Sweden
Operating temperature: -40℃~+80℃
Spherical Bearing: LS bearing made in China
read more
28
Aug
FLUTEC Hydraulics successfully exported 4 pieces of Boom cylinder 400/200×3550 to RBCT in South Africa.
The piston rods are made in EN24T material and Ni/Cr plated . Hallite Seals and LYC bearings are used for these cylinders
The appointed quality engineer inspected all the material certificates, welding process procedure, finished... read more
19
May
FLUTEC Hydraulics successfully exported many hydraulic cylinders to a world class press manufacturer
All cylinder tubing were made from AISI 1045 forging steel Heat treatment to Min. 380Mpa yield strength
All cylinder rods were made from AISI 4140 forging steel HSR to Min. HRC28
USA famous seals... read more
28
May
FLUTEC Hydraulics has exported four only Splitting Cylinders and one hydraulic Control System for Splitting Hopper Barge
Bore:650mm, Rod:350, Stroke:1860
Tube material: Q345D
Rod material:42CrMo
Coating on Rod: Laser cladding
Seals Make: Merkel
Class Certificate: BV
f
read more
12
Jun
FLUTEC Hydraulics spent 75days in manufacturing four only large bore press cylinders
Bore:24inches, Rod:22.5inches,Stroke:120inches ,Weight:35540LBS,Working Pressure:4420PSI
Cylinder Body is made of AISI 1045 forging steel,Piston Rod is made of AISI 4140 forging steel
1000ton capacity per cylinder, two pcs assembly per 2000Ton press machine
... read more
18
Jun
FLUTEC Hydraulics successfully exported one Bore280/140×5450 hydraulic cylinder c/w valve manifold to a Hydropower Plant located in Vietnam.
The piston rod was made in 2Cr13 stainless steel and double layer chrome layers.
Parker seals and Rexroth Valves were used for this cylinder.
The Vietnamese inspect engineers have... read more
27
Dec
Flutec Hydraulics spent 3 months in manufacturing two sets of AGC cylinders.
The two AGC cylinders were installed with MTS sensor and Merkel seals.
Bore 1300mm x Rod1150mm x stroke65
Cylinder weight is about 16200kgs
read more
25
Jun
FLUTEC Hydraulics successfully exported many pcs of hydraulic cylinders to Master Drilling Group
Our Hydraulic cylinders have been installed in their key earth boring equipments .
Every hydraulic cylinder was inspected by their appointed inspecting engineer.
read more
06
Sep
Large Bore Press Cylinder
Bore1250mm/Rod1150mmXStroke1050mm
So much big challenge for every step from forging raw materials, machining parts, general assembly,press testing and painting to delivery.
Thanks for our team’s hard working.
Congratulations to our team
read more