FLUTEC Hydraulics spent 75days in manufacturing four only large bore press cylinders Bore:24inches, Rod:22.5inches,Stroke:120inches ,Weight:35540LBS,Working Pressure:4420PSI Cylinder Body is made of AISI 1045 forging steel,Piston Rod is made of AISI 4140 forging steel 1000ton capacity per cylinder, two pcs assembly per 2000Ton press machine
FLUTEC Hydraulics has exported four only Splitting Cylinders and one hydraulic Control System for Splitting Hopper Barge Bore:650mm, Rod:350, Stroke:1860 Tube material: Q345D Rod material:42CrMo Coating on Rod: Laser cladding Seals Make: Merkel Class Certificate: BV f
Long Stroke Hydraulic Cylinder for Dam Gate Control Bore 650 / Rod 320 x Stroke 10850 Working Pressure: 200bar Rod Coating: Ceramic Coated
Pressure testing on Luffing Cylinder for Pile Driving Barge Bore680/Rod380xStroke7460
FLUTEC Hydraulics successfully exported 4 pieces of Boom cylinder 400/200×3550 to RBCT in South Africa. The piston rods are made in EN24T material and Ni/Cr plated . Hallite Seals and LYC bearings are used for these cylinders The appointed quality engineer inspected all the material certificates, welding process procedure, finished parts dimensions and pressure testing. And these four cylinders have been certified by SGS as per end-user’s requirements.
FLUTEC Hydraulics successfully exported one Bore280/140×5450 hydraulic cylinder c/w valve manifold to a Hydropower Plant located in Vietnam. The piston rod was made in 2Cr13 stainless steel and double layer chrome layers. Parker seals and Rexroth Valves were used for this cylinder. The Vietnamese inspect engineers have inspected this hydraulic hoist step by step and is very satisfied with our quality.
FLUTEC Hydraulics successfully exported many hydraulic cylinders to a world class press manufacturer All cylinder tubing were made from AISI 1045 forging steel Heat treatment to Min. 380Mpa yield strength All cylinder rods were made from AISI 4140 forging steel HSR to Min. HRC28 USA famous seals Brand “System“ are used for these cylinders.
FLUTEC Hydraulics successfully exported many pcs of hydraulic cylinders to Master Drilling Group Our Hydraulic cylinders have been installed in their key earth boring equipments . Every hydraulic cylinder was inspected by their appointed inspecting engineer.
FLUTEC Hydraulics successfully exported one Intake Gate Control Cylinder 320/140×6300 with lock cylinders and transducer sensor to Hydropower Plant loacted in Kazakstan The piston rod was made of 1Cr17Ni2 stainless steel and hard chrome plated. Parker seals were used for this cylinder.
FLUTEC Hydraulics Successfully exported hydraulic cylinder 400/180×7300 to South Africa. These cylinders will be installed on Stacker Reclaimers in a coal mine. The appointed inspector has checked all material certificates,dimension inpsected reports and witnessed the pressure testing. The piston rods were made of EN19T and NiCr plated . Hallite Seals were used for these cylinders We got high praise from the client and started good relationship to supply more and more cylinders in future. [...]
©2022 FLUTEC Hydraulics (Changzhou) Co., Ltd.